Aruba AP-514 Wireless Access Point (Q9H57A)

Mô tả

Aruba AP-514 Wireless Access Point (Q9H57A)

– Part Number: Q9H57A.

– Aruba AP-514 (RW) Dual Radio 4×4:4 + 2×2:2 802.11ax External Antennas Unified Campus AP.

– 2.69Gbps maximum real-world speed (HE80/HE20).

- WPA3 and Enhanced Open security.

- Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.

- OFDMA and MU-MIMO for enhanced multi-user efficiency

- IoT-ready Bluetooth 5 and Zigbee support.

Specifications

Wi-Fi Radio Specifications

– AP type: Indoor, dual radio, 5GHz 802.11ax 4×4 MIMO and 2.4GHz 802.11ax 2×2 MIMO.

– 5GHz radio:

+ Four spatial stream Single User (SU) MIMO for up to  4.8Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (max);

+ Two spatial stream Single User (SU) MIMO for up to  1.2Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical);

+ Four spatial stream Multi User (MU) MIMO for up to 4.8Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max);

+ Four spatial stream Multi User (MU) MIMO for up to 2.4Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical).

– 2.4GHz radio:

+ Two spatial stream Single User (SU) MIMO for up to 575Mbps wireless data rate to individual 2SS HE40 802.11ax client devices or to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (max);

+ Two spatial stream Single User (SU) MIMO for up to 287Mbps wireless data rate to individual 2SS HE20 802.11ax client devices or to two 1SS HE20 802.11ax DL-MU-MIMO capable client devices simultaneously (typical);

– Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio.

– Supported frequency bands (country-specific restrictions apply):

+ 2.400 to 2.4835GHz;

+ 5.150 to 5.250GHz;

+ 5.250 to 5.350GHz;

+ 5.470 to 5.725GHz;

+ 5.725 to 5.850GHz.

– Supported radio technologies:

+ 802.11b: Direct-sequence spread-spectrum (DSSS);

+ 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM);

+ 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (for an 80MHz channel).

– Supported modulation types:

+ 802.11b: BPSK, QPSK, CCK;

+ 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension);

+ 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension);

+ 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM.

– Supported data rates (Mbps):

+ 802.11b: 1, 2, 5.5, 11;

+ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54;

+ 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40);

+ 802.11n (5GHz): 6.5 to 600 (MCS0 to MVC31, HT20 to HT40);

+ 802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160);

+ 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40);

+ 802.11ax (5GHz): 3.6 to 4,803 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160).

Wi-Fi Antennas

– Four RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.

Additional Interfaces

– E0: HPE SmartRate port (RJ-45, maximum negotiated speed 2.5Gbps)

+ Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX;

+ 2.5Gbps speed complies with NBase-T and 802.3bz specifications;

+ POE-PD: 48Vdc (nominal) 802.3af/802.3at POE.

– E1: 10/100/1000BASE-T Ethernet network interface (RJ-45)

+ Auto-sensing link speed and MDI/MDX.

– Link aggregation (LACP) support between both network ports for redundancy and increased capacity.

– DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length.

– USB 2.0 host interface (Type A connector)

+ Capable of sourcing up to 1A / 5W to an attached device.

Power Sources and Power Consumption

– The AP supports direct DC power and Power over Ethernet (POE; on port E0).

– When both power sources are available, DC power takes priority over POE.

– Maximum (worst-case) power consumption:

+ DC powered: 16W;

+ POE powered (802.3af, IPM enabled): 13.5W;

+ POE powered (802.3at/bt): 20.8W.

– Bảo hành: 12 tháng.