Palo Alto PA-850 (PAN-PA-850)

Mô tả

Palo Alto PA-850 (PAN-PA-850)

• Giá bán : Liên hệ để có giá tốt 
• Thiết bị tường lửa Palo Alto Networks PA-850
  

  SKU	PAN-PA-850
  Performance and Capacities
  Firewall throughput (HTTP/appmix)	2.1 / 2.1 Gbps
  Threat Prevention throughput (HTTP/appmix)	1.0 / 1.2 Gbps
  IPsec VPN throughput	1.6 Gbps
  New sessions per second	13,000
  Max sessions	192,000
  Hardware Specifications
  I/O	● 10/100/1000 (4), Gigabit SFP (8) or ● 10/100/1000 (4), Gigabit SFP (4), 10 Gigabit SFP+ (4)
  Management I/O	10/100/1000 out-of-band management port (1) 10/100/1000 high availability (2) RJ-45 console port (1) USB port (1) Micro USB console port (1)
  Storage Capacity	240 GB SSD
  Power Supply	AC 450 W power supplies (2); one is redundant
  Power Consumption	Maximum: 240 W Average: 64 W
  Max BTU/hr	256
  Input Voltage (Input Frequency)	100–240 VAC (50–60Hz)
  Max Current Consumption	2.0 A @ 100 VAC, 1.0 A @ 240 VAC
  Max Inrush Current	1.0 A @ 230 VAC, 1.84 A @ 120 VAC
  Rack Mount (Dimensions)	1U, 19” standard rack (1.75” H x 14.5” D x 17.125” W)
  Weight (Standalone Device/As Shipped)	13.5 lbs / 21.5 lbs
  Safety	cTUVus, CB
  EMI	FCC Class A, CE Class A, VCCI Class A
  Environment	– Operating temperature: 32° to 104° F, 0° to 40° C – Non-operating temperature: -4° to 158° F, -20° to 70° C
  Airflow	Front to back

  ---

  Networking Features
  Interface Modes	L2, L3, tap, virtual wire (transparent mode)
  Routing	OSPFv2/v3 with graceful restart, BGP with graceful restart, RIP, static routing Policy-based forwarding Point-to-Point Protocol over Ethernet (PPPoE) Multicast: PIM-SM, PIM-SSM, IGMP v1, v2, and v3
  SD-WAN	Path quality measurement (jitter, packet loss, latency) Initial path selection (PBF) Dynamic path change
  IPv6	L2, L3, tap, virtual wire (transparent mode) Features: App-ID, User-ID, Content-ID, WildFire, and SSL Decryption SLAAC
  IPsec VPN	Key exchange: manual key, IKEv1, and IKEv2 (pre-shared key, certificate-based authentication) Encryption: 3DES, AES (128-bit, 192-bit, 256-bit) Authentication: MD5, SHA-1, SHA-256, SHA-384, SHA-512
  VLANs	802.1Q VLAN tags per device/per interface: 4,094/4,094 Aggregate interfaces (802.3ad), LACP
  Network Address Translation	NAT modes (IPv4): static IP, dynamic IP, dynamic IP and port (port address translation) NAT64, NPTv6 Additional NAT features: dynamic IP reservation, tunable dynamic IP and port oversubscription
  High Availability	Modes: active/active, active/passive Failure detection: path monitoring, interface monitoring
  Zero Touch Provisioning (ZTP)	Available with -ZTP SKUs (PA-850-ZTP) Requires Panorama 9.1.3 or higher