Mô tả
Mixer Amplifier 360W chọn 6 vùng loa TOA VM-3360VA ( hàng dự án )
– Bộ khuếch đại đa chức năng có thể lắp trên Rack chuẩn EIA.
– Ngõ ra loa có bộ suy giảm nội bộ, bộ chọn 6 vùng.
– Chức năng giám sát tự động kiểm tra hệ thống.
– Nguồn điện: 230VAC, 50/60 Hz.
– Công suất tiêu thụ: 850W (với tín hiệu ra đánh giá), 380W (theo EN60065).
– Công suất ngõ ra: 360W.
– Kích thước: 482 x 132.6 x 431.2 mm.
– Trọng lượng: 19 kg.
Đặc tính kỹ thuật
| Power Source | 230 VAC, 50/60 Hz |
| Power Consumption | 850 W (with rated output signal), 380 W (according to EN60065) |
| Rated Output | 360 W |
| Frequency Response | 50 Hz – 20 kHz, ±3 dB (at 1/3 rated output) |
| Distortion | 0.7 % or less (at rated output, 1 kHz) |
| S/N Ratio | 85 dB or more |
| Audio Input/Output Characteristic | Sampling frequency: 48 kHz |
| A/D D/A converter: 24 bit | |
| Input | Input 1 – 3: -50 dB (MIC)/-10 dB (LINE) (changeable), 600 Ω, electronically balanced, combined XLR connector (female)/phone jack |
| Input 4: -50 dB (MIC)/-10 dB (LINE) (changeable), 600 Ω, electronically balanced, removable terminal block (14 pins) | |
| BGM 1 – 2: -10 dB, 10 kΩ, unbalanced, RCA pin jack | |
| External amplifier input: 100 V line, removable terminal block (14 pins) | |
| Output | Speaker output 1 – 2: Max. (360 W) per output |
| Speaker output 3 – 6: Max. (120 W) per output | |
| Speaker output 1 – 6: Total within 360 W, removable terminal block (14 pins) | |
| Allowable minimum load: 500 Ω (20 W) at 100 V line for speaker line failure detection | |
| Direct output: Direct output from internal or external amplifier, removable terminal block (16 pins) | |
| Recording output BGM/Paging: 0 dB, 10 kΩ, unbalanced, RCA pin jack | |
| RM Link | Input 1 – 2: Connecting the RM-300MF/RM-200M Remote Microphone. |
| RJ45 female connector | |
| Maximum distance: Total 800 m (874.89 yd) between this unit and remote microphones | |
| Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | |
| Network I/F | 10BASE-T / 100BASE-TX (selectable by automatic negotiation), RJ45 female connector |
| Maximum distance: 100 m (109.36 yd) between this unit and a switching hub | |
| Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | |
| VM Link | Output: Connecting the VM-3240E or VM-3360E, RJ45 female connector |
| Maximum distance: 800 m (874.89 yd) | |
| Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | |
| EXT PA Link | Connecting the VP-2421, RJ45 female connector |
| Maximum distance: 5 m (16.4 ft) | |
| Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | |
| General Control | Input 1 – 8: No-Voltage make contact input, open voltage: 24VDC, short-circuit current: 2 mA or less, removable terminal block (14 pins) |
| Output 1 – 8: Isolated open collector output, withstand voltage: 30VDC, operating current: 10 mA or less, removable terminal block (14 pins) | |
| Emergency Control | Input 1 – 5: No-Voltage make contact input, open voltage: 24 VDC, short-circuit current: 2 mA or less, RJ45 female connector |
| Input 6: Isolated voltage input, Inactive: -24 V ±20 %, Active: +24 V ±20 %, RJ45 female connector | |
| Status out: Relay contact output, withstand voltage: 40 VDC, operating current: 2 – 300 mA, RJ45 female connector | |
| ATT Control | Relay contact 1-6, 125 VAC or 30 VDC, total under 5 A, removable terminal block (16 pins) |
| Power Input/ Output | Power in: Connecting the VX-2000DS only (operating range: 20 – 40 VDC) |
| PS out: 28 VDC/24 A | |
| M4 screw terminal, distance between barriers: 11 mm (0.43′) | |
| DC24V Output | 24 VDC, Maximum feeding current 0.3 A |
| Ds Link | Connecting the VX-2000DS, RJ45 female connector |
| Maximum distance: 5 m (16.4 ft) | |
| Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | |
| Finish | Panel: Aluminum, hairline, black |
| Case: Surface-treated steel plate, black, paint | |
| Dimensions | 482 x 132.6 x 431.2 mm |
| Weight | 19 kg |
– Sản xuất tại Trung Quốc.
– Bảo hành: 12 tháng.
