Mô tả

Máy bộ đàm hàng hải ICOM IC-M25

–       Máy bộ đàm hàng hải ICOM IC-M25 là mẫu máy mới với thiết kế mỏng, nhẹ, chất lượng vượt trội so với IC-M24.

–       Bộ đàm IC-M25 nổi trên mặt nước với đèn LED đỏ phát sáng, đèn nền màn hình LCD và dễ dàng phát hiện vị trí nổi trên mặt nước.

–       Màn hình LCD lớn hơn 30% so với IC-M24, nhìn rõ ràng hơn.

–       Sạc Pin bằng cáp USB type B phù hợp với nhiều thiết bị sạc khác như: Sạc trên xe hơi (Vị trí mồi thuốc lá), sạc của điện thoại di động Smart phone (5V/1A max)….

–       Pin sử dụng khoảng 11 giờ (Phát-Thu-Chờ: 5-5-90).

–       Công suất phát: 5W.

–       Tầm tần số: 156,025 đến 163,275MHz.

–       Công suất loa: 550mW.

–       Chức năng quét kênh tự động.

–       Tiêu chuẩn chống thấm nước IPX7 (Không thấm nước ở độ sâu 1 mét trong 30 phút).

Phụ kiện kèm theo:

–       Pin Lithium-Ion  1500mAh.

–       Bộ sạc USB BC-217SA/SE.

–       Anten FA-SC59V.

–       Kẹp MB-133.

–       Máy sản xuất tại Nhật Bản.

–       Bảo hành: 24 tháng cho thân máy, 12 tháng cho Pin và phụ kiện.

Features

New Style! Three Color Choices and Smart Features

Slim, Lightweight, High Performance

The IC-M25 has the slimmest (depth:30.5mm; 1.2in) and lightest (220g; 7.8oz) body as a floating marine transceiver*. It also delivers uncompromised performance that will exceed expectations.

*As of July, 2015, researched by Icom.

 

Large LCD, Simple User Interface

The IC-M25’s LCD is 30% larger than its predecessor, the IC-M24 and shows clearly large channel number and status icons. The buttons on the front panel are well laid out and provide simple and straightforward operation.

 

USB Charging (Micro-B USB type)

A standard USB connector (Micro-B type) is used for charging the IC-M25. Cigarette lighter cables or mobile batteries for charging smartphones or other devices can be used with the IC-M25*.

* The IC-M25 accepts 5V/1A (Max.) input. Use of third-party products is not guaranteed.

 

Float’n Flash

The IC-M25 floats and lets you know where it is with the flashing red LED light and LCD/key backlight.

 

11 Hours of Battery Life

The built-in 1500mAh lithium-ion battery allows 11 hours (approx.) of long operation*.

* Typical operation with Tx (Hi): Rx: standby=5:5:90

 

Optional Speaker-Microphone, HM-213

The optional waterproof speaker-microphone, HM-213, provides commercial grade convenience while mounting the radio around the waist. The radio floats

even when the HM-213 is attached.

 

550mW Audio Output

The IC-M25 provides a powerful 550mW (typical) audio output and received voice can be heard loud and clear.

 

Other Features

IPX7 waterproof construction

(1m depth of water for 30 minutes)

4-step battery life indicator

Weather channel with weather alert

Dual/Tri-watch functions

Instant access to Ch 16 or programmable call channel

Favorite channel function

Monitor function opens noise squelch

Auto scan function

LCD auto backlighting

AquaQuake™ draining function

Specifications

General

 

IC-M25

Frequency range Tx 156.025–157.425MHz
Rx 156.050–163.275MHz
Usable channel groups INT, USA, CAN, WX channels
Type of emission 16K0G3E (FM)
Power supply voltage 3.7V DC nominal
Current drain Tx 2.3A
Rx (Internal SP/External SP) 300mA/200mA (Max. audio)
Operating temperature range –20°C to +60°C; –4°F to +140°F
Antenna impedance 50Ω
Dimensions (W×H×D)
(Projections not included)
56.6×134.2×30.5mm;
2.2×5.3×1.2 in
Weight (approximately) 220g; 7.8oz
(With FA-SC59V and MB-133)

TRANSMITTER

Output power 5W (approximately)/1W
Max. frequency deviation ±5.0kHz
Frequency stability ±10ppm
Spurious emissions –68dBc typical
Adjacent channel power 70dB
Residual modulation 40dB

RECEIVER

Sensitivity 0.25μV typical (at 12dB SINAD)
Squelch sensitivity 0.25μV typical (at threshold)
Adjacent channel selectivity 70dB typical
Spurious response 70dB typical
Intermodulation 70dB typical
Audio output power
(at 10% distortion)
Internal SP 550mW typical (12Ω load)
External SP 300mW typical (4Ω load)

Applicable IP Rating

Ingress Protection Standard
Water IPX7 (Waterproof protection)

Measurements made in accordance with TIA/EIA-603. 
All stated specifications are subject to change without notice or obligation.