Email: quangmaico@quangmai.net - quangmaico@gmail.com
Amply công suất Yamaha PC406-D
Mô tả
Thông số kỹ thuật
| Output Power; 1kHz, Non-clip, 20msec Burst, All channels driven | 16Ω | 300W x 4 |
|---|---|---|
| 8Ω | 600W x 4 | |
| 4Ω | 900W x 4 | |
| 2Ω | 1300W x 4 | |
| 8Ω (BRIDGE mode) | 1800W x 2 | |
| 4Ω (BRIDGE mode) | 2600W x 2 | |
| Hi-Z (70V mode) | – | |
| Hi-Z (100V mode) | – | |
| Amplifier class | Class D, Single ended output | |
| Total harmonic distortion | 0.01% (8Ω, 1kHz, 10W, All channels driven), 0.1% (4Ω, 1kHz, Half power, All channels driven) | |
| Frequency response | +0.5, -1.5dB @8Ω, 1W, 20Hz to 20kHz (HPF Thru) | |
| Crosstalk | ≦ -60dB (8Ω, 1kHz, Half power, Input 150Ω shunt A-weighted) | |
| S/N ratio | 109dB (8Ω, Gain setting = 32dB, A-weighted) | |
| Voltage Gain/Sensitivity | 8Ω Volume max | 32.0dB/+7.0dBu (Gain setting: 32dB), 26.0dB/+13.0dBu (Gain setting: 26dB), 35.0dB/+4.0dBu (Gain setting: +4dBu), 25.0dB/+14.0dBu (Gain setting: +14.0dBu) |
| Hi-Z 100V mode, Volume max | – | |
| Hi-Z 70V mode, Volume max | – | |
| Protection circuit | Load protection | POWER switch on/off: Output mute, Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset, DC-fault: Power supply shutdown (NOT restored automatically) |
| Amplifier protection | Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically), Over current: Output mute (Restored automatically), Over voltage: Output limiter (Restored automatically), Integrated Power Limit: Output limiter (Restored automatically) | |
| Power supply protection | Thermal: Output limiter (Restored automatically) → Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown | |
| Cooling | 7 step variable speed fan x 3, front to rear airflow | |
| Maximum input voltage | +25dBu | |
| Input impedance | 20kΩ (balanced) | |
| Sampling frequency rate | 96kHz | |
| A/D D/A Converters | AD: 24-bit linear; DA: 24-bit linear | |
| Dante Interface | Channel count | 16 IN with Dante Redundancy, 16 OUT |
| Sampling frequency | 96/88.2/48/44.1kHz | |
| Dante latency | 0.25/0.5/1/2/5ms | |
| Bit depth | 32/24bit | |
| Processors | 20 x 8 input matrix mixer, Room EQ: 16 band IIR EQ, Room Delay: 0 – 1000msec, Speaker Processor: X-Over (IIR/FIR*), PEQ (16 band IIR/FIR*), Delay, Peak Limiter, RMS Limiter | |
| Latency | Analog Input to Speakers: 1.5msec; Dante Input to Speakers (Dante latency setup = 0.25msec): 1.8msec (fs=96kHz), 1.9msec (fs=88.2kHz), 2.5msec (fs=48kHz), 2.7msec (fs=44.1kHz) | |
| I/O Connectors | Analog Input | XLR-3-31 x 4 |
| Digital I/O | Dante Interface: etherCON x 2 (Redundant/Daisy Chain) | |
| Speaker Output | Neutrik speakON NL4 x 4 | |
| Control ports | RJ45 x 1 | |
| AC | AC inlet (powerCON 20A) x 1 | |
| Others | Remote, Fault Output: Euro block 8pin (mini) x2 (GPI x 4, GPO x 6, +5V x 2) | |
| Indicators | Power (Green) x 1; Channel Status x 4 : Signal (Green), Limit (Yellow), Protect/Mute (Red); Auto LED off and dimmer feature (except POWER LED) | |
| Power requirements | 100V – 240V 50Hz/60Hz ** | |
| Power consumption | 1050W (1/8 MAX power, 2Ω, Pink noise at all channels), 165W (Idle), 100W (Sleep, all channels), 9W (Standby 100V/120V), 12W (Standby 230V) | |
| Operating temperature | 0°C to +40°C | |
| Storage temperature | -20°C to +60°C | |
| Dimensions | W | 480mm (18.90 inch) |
| H | 88mm (3.46 inch): 2U | |
| D | 528mm (20.79 inch) | |
| Net weight | 15.6 kg (34.4 lbs) | |
| Accessories | Owner’s Manual x 1, Power Cable (2.0m) x 1, GPIO Mini Euro block plug 3.5mm 8p x 2, Air filter (L x 1, R x 1), Grill (L x 1, R x 1), Handle x 2, Screw x 4 | |
HOTLINE DỰ ÁN
0906 845 709
(Mrs.Mai)
