Email: quangmaico@quangmai.net - quangmaico@gmail.com
4-Port Ethernet over VDSL2 Bridge (Profile 30a) PLANET VC-234
Mô tả
4-Port Ethernet over VDSL2 Bridge (Profile 30a) PLANET VC-234
– Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution.
– One box design, CO / CPE selectable via DIP Switch.
– Defines symmetric band plan for the transmission of upstream and downstream signals.
– Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control Ethernet standards.
– DMT (Discrete Multi-Tone) line coding.
– Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control.
– Built-in POTS splitter to share voice and data.
– Two RJ11 connectors for each VDSL port, one for VDSL connection and one for POST connection.
– Voice and data communication can be shared simultaneously based on the existing telephone wire.
– 4 x 10/100Mbps RJ45 port, Auto-Negotiation and Auto-MDI/MDI-X.
– Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent.
– Hardware IGMP Snooping for Multimedia service.
– VDSL2 stand-alone transceiver for simple bridge modem application.
– Advantage of minimum installation time (Simply as Plug-and-Play).
– Selectable target profile and target SNR margin.
– Supports extensive LED indicators for network diagnosis.
Đậc tính kỹ thuật
| Ports | 10/100Base-TX: 4 RJ-45, Auto-Negotiation and Auto-MDI/MDI-X |
| VDSL: 1 RJ-11, female Phone Jack | |
| PHONE: 1 RJ-11, Built-in splitters for POTS connection | |
| DIP Switch | 4 position DIP switch |
| Functionality | CO / CPE mode select |
| Selectable fast and interleaved mode | |
| Selectable target 17a / 30a profiles | |
| Selectable target SNR mode | |
| Encoding | VDSL-DMT: ITU-T G.993.1 VDSL, ITU-T G.997.1, ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) |
| LED Indicators | One Power |
| 4 for RJ-11/VDSL2 | |
| 1 for per RJ45 10/100Base-TX port | |
| Cabling | Ethernet |
| 10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft) | |
| 100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft) | |
| VDSL | |
| Twisted-pair telephone wires (AWG24 or better) up to 1.4km | |
| Performance (Downstream / Upstream) | 17a profile |
| 300m -> 99/70Mbps | |
| 400m -> 99/60Mbps | |
| 600m -> 90/45Mbps | |
| 800m -> 50/28Mbps | |
| 1000m -> 40/12Mbps | |
| 1200m -> 20/7Mbps | |
| 1400m -> 20/4Mbps | |
| 30a profile | |
| 300m -> 100/100Mbps | |
| 400m -> 90/90Mbps | |
| 600m -> 69/55Mbps | |
| 800m -> 48/9Mbps | |
| Switch Specifications | |
| Switch Processing Scheme | Store-and-Forward |
| Address Table | 2K entries |
| Flow Control | Back pressure for half duplex |
| IEEE 802.3x Pause Frame for full duplex | |
| Switch fabric | 0.8Gbps |
| Throughput (packet per second) | 0.59Mpps |
| Network cables | 10/100Base-TX: |
| 2-Pair UTP Cat. 3, 4, 5 (100meters, max.) | |
| EIA / TIA-568 100-ohm STP (100meters, max.) | |
| Standard Conformance | |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3 10Base-T |
| IEEE 802.3u 100Base-TX | |
| ITU-T: G.993.1 (VDSL), G.997.1, G.993.2 VDSL2 (Profile 17a/30a) | |
| Power Requirements | 5V DC, 2A |
| Power Consumption | 7.2 Watts/ 24 BTU |
| Dimensions | 155 x 86 x 26 mm |
| Weight | 368g |
– Sản suất tại Taiwan.
– Bảo hành: 12 tháng.
